Fingerprint Attendance System

Click Here to View Step by Step

Overview 


There are many methods to track the attendance of an individual. A few years ago, when Radio Frequency Identification (RFID)  Or fingerprint electronics were still in their adolescence stages, the time stamping technique was greatly followed. As software programming and technology progressed, especially in electronics, they gave way to a much more secure and reliable arrangement known as the fingerprint Attendance System.
The fingerprint-based attendance system is developed using PHP, CSS, and Javascript working by WIFI. A fingerprint Attendance System Using NodeMCU is a modern attendance system. Hence, is a very interesting project. It can be useful in different places like schools, Colleges, industry, and private organizations to register the attendance of students, teachers, employees, etc. to tabulate monthly/daily working hours automatically. Us

The fingerprint attendance system is developed with the IoT platform. We have used the NodeMCU ESP8266 development board with R307 and Oled display Module to send the card UID to the PHP Web app and store data in the website database. Basically, the admin plays an important role in the management of this system.
The fingerprint attendance system is developed very easily setup on your server 

 

System Specifications and Features

Unlimited employees
Admin Login/Logout System 
Forgot the Password for the admin
Edit and Update the admin profile
View users
Add New User
Edit and update the existing users
Remove Users
attendance records reports.
Change the device mode (Enrollment mode: to register new users to the system, Attendance Mode: To record attendance of registered users)


OLED Graphic Display 

OLED Graphic Display

OLED Graphic Display 128x64 Serial I2C 0.96 inch (Organic Light-Emitting Diode) have higher contrast than LCD display. Because the display makes its own light, no backlight is required (This reduces the power required to run the OLED and is why the display has such high contrast).  

This OLED module is easy to use since it is connected to a microcontroller (Arduino) through I2C. It is covered by 128x64 pixels. 

Features

Operating voltage: 3.3V-5V
Resolution: 128x64
Visual Angle: >160°
Interface: I2C.
Pixel Color: Blue
Working temperature: -30°C ~ 70°C
Module size: 27.0 x 27.0 x 4.1mm
OLED driver IC: SSD1306
 

Fingerprint Module R307

Fingerprint Module R307

R307 is an optical fingerprint verification module with a TTL interface. It consists of the optical fingerprint sensor, high-performance DSP processor, and Flash. It has many functions such as Fingerprint sensors, fingerprint verification, fingerprint upload, and download.

Users can easily develop powerful fingerprint verification application systems based on the rich collection of controlling commands provided by the module. The R307 can be easily used with Arduino,esp8266, esp32, Tiva C, STM, and raspberry,. 

Specifications

Operating Voltage:                       4.2VDC  : 6VDC 
Operating Current:                    <50mA(Input voltage 5V) 
 Search Time:                             <1 second 
 Fingerprint image input time: <0.3 second 
Window area:                               14 X 18 mm 
 User Storage Capacity:             1000 image 
 Interface Protocol:                       Standard serial interface (TTL level) 
 Communication Baud Rate:        57600 bps (Default Value)

 

Circuit Diagram: IOT Fingerprint Attendance System

Fingerprint Attendance System

 

NodeMCU ESP8266 / OLED Display 

D1 <———-> SDA

D2<———-> SCK

GND <———-> GND

3V/3V3 <———-> 3.3V

 

NodeMCU ESP8266 / Fingerprint Module R307

D6 <———-> RX

D5<———-> TX

GND <———-> GND

5V <———-> 5V

Arduino IDE libraries downloads

SimpleTimer

Adafruit_GFX

Adafruit_SSD1306

Adafruit_Fingerprint

Arduino IDE Code 

//NodeMCU--------------------------
#include <WiFiClient.h> 
#include <ESP8266WiFi.h>
#include <SoftwareSerial.h>
#include <ESP8266HTTPClient.h>
#include <SimpleTimer.h>           //https://github.com/jfturcot/SimpleTimer
//OLED-----------------------------
#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>          //https://github.com/adafruit/Adafruit-GFX-Library
#include <Adafruit_SSD1306.h>      //https://github.com/adafruit/Adafruit_SSD1306
#include <Adafruit_Fingerprint.h>  //https://github.com/adafruit/Adafruit-Fingerprint-Sensor-Library
//************************************************************************
//Fingerprint scanner Pins
#define Finger_Rx 14 //D5
#define Finger_Tx 12 //D6
#define led_blue 13 //D8
#define led_green 15 //D7
 
// Declaration for SSD1306 display connected using software I2C pins are(22 SCL, 21 SDA)
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
#define OLED_RESET     0 // Reset pin # (or -1 if sharing Arduino reset pin)
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
//************************************************************************
SimpleTimer timer;
SoftwareSerial mySerial(Finger_Rx, Finger_Tx);
Adafruit_Fingerprint finger = Adafruit_Fingerprint(&mySerial);
//************************************************************************
/* Set these to your desired credentials. */
const char *ssid = "domy3";
const char *password = "egsmile010";
const char* device_token  = "edafait";
//************************************************************************
String getData, Link;
String URL = "http://192.168.1.5:8081/biometricattendace/getdata.php"; //computer IP or the server domain
//************************************************************************
int FingerID = 0, t1, t2;                                  // The Fingerprint ID from the scanner 
bool device_Mode = false;                           // Default Mode Enrollment
bool firstConnect = false;
 int id;
unsigned long previousMillis = 0;
//*************************Biometric Icons*********************************
#define Wifi_start_width 54
#define Wifi_start_height 49
const uint8_t PROGMEM Wifi_start_bits[] = {
  0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x1f,0xf0,0x00,0x00,0x00
,0x00,0x03,0xff,0xff,0x80,0x00,0x00
,0x00,0x1f,0xf0,0x1f,0xf0,0x00,0x00
,0x00,0x7e,0x00,0x00,0xfc,0x00,0x00
,0x01,0xf0,0x00,0x00,0x1f,0x00,0x00
,0x03,0xc0,0x00,0x00,0x07,0xc0,0x00
,0x0f,0x00,0x00,0x00,0x01,0xe0,0x00
,0x1c,0x00,0x00,0x00,0x00,0x70,0x00
,0x38,0x00,0x07,0xc0,0x00,0x38,0x00
,0x70,0x00,0xff,0xfe,0x00,0x1e,0x00
,0xe0,0x03,0xfc,0x7f,0xc0,0x0e,0x00
,0x00,0x1f,0x80,0x03,0xf0,0x00,0x00
,0x00,0x3c,0x00,0x00,0x78,0x00,0x00
,0x00,0xf0,0x00,0x00,0x1c,0x00,0x00
,0x01,0xe0,0x00,0x00,0x0c,0x00,0x00
,0x03,0x80,0x00,0x00,0x00,0x00,0x00
,0x03,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x3f,0xf8,0x07,0x1e,0x00
,0x00,0x00,0xff,0xfe,0x1f,0xbf,0x80
,0x00,0x03,0xe0,0x04,0x7f,0xff,0xc0
,0x00,0x07,0x80,0x00,0xff,0xff,0xe0
,0x00,0x0e,0x00,0x00,0xff,0xff,0xe0
,0x00,0x0c,0x00,0x00,0x7f,0xff,0xc0
,0x00,0x00,0x00,0x00,0xfe,0x07,0xe0
,0x00,0x00,0x00,0x03,0xf8,0x03,0xf8
,0x00,0x00,0x07,0xe7,0xf9,0xf1,0xfc
,0x00,0x00,0x1f,0xe7,0xf1,0xf9,0xfc
,0x00,0x00,0x1f,0xe7,0xf3,0xf9,0xfc
,0x00,0x00,0x3f,0xe7,0xf3,0xf9,0xfc
,0x00,0x00,0x3f,0xe7,0xf1,0xf1,0xfc
,0x00,0x00,0x3f,0xe3,0xf8,0xe3,0xfc
,0x00,0x00,0x3f,0xf3,0xfc,0x07,0xf8
,0x00,0x00,0x1f,0xf0,0x7f,0x0f,0xc0
,0x00,0x00,0x0f,0xe0,0x7f,0xff,0xe0
,0x00,0x00,0x07,0xc0,0xff,0xff,0xe0
,0x00,0x00,0x00,0x00,0x7f,0xff,0xe0
,0x00,0x00,0x00,0x00,0x3f,0xff,0x80
,0x00,0x00,0x00,0x00,0x1f,0xbf,0x00
,0x00,0x00,0x00,0x00,0x03,0x18,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};
#define Wifi_connected_width 63
#define Wifi_connected_height 49
const uint8_t PROGMEM Wifi_connected_bits[] = {
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x03,0xff,0xff,0x80,0x00,0x00
,0x00,0x00,0x3f,0xff,0xff,0xf8,0x00,0x00
,0x00,0x01,0xff,0xff,0xff,0xff,0x00,0x00
,0x00,0x0f,0xff,0xff,0xff,0xff,0xe0,0x00
,0x00,0x3f,0xff,0xc0,0x07,0xff,0xf8,0x00
,0x00,0xff,0xf8,0x00,0x00,0x3f,0xfe,0x00
,0x03,0xff,0x80,0x00,0x00,0x03,0xff,0x80
,0x07,0xfe,0x00,0x00,0x00,0x00,0xff,0xc0
,0x1f,0xf8,0x00,0x00,0x00,0x00,0x3f,0xf0
,0x3f,0xe0,0x01,0xff,0xff,0x00,0x0f,0xf8
,0x7f,0x80,0x0f,0xff,0xff,0xe0,0x03,0xfc
,0xff,0x00,0x7f,0xff,0xff,0xfc,0x01,0xfe
,0xfc,0x01,0xff,0xff,0xff,0xff,0x00,0x7e
,0x78,0x07,0xff,0xc0,0x07,0xff,0xc0,0x3c
,0x00,0x0f,0xfc,0x00,0x00,0x7f,0xe0,0x00
,0x00,0x1f,0xf0,0x00,0x00,0x1f,0xf0,0x00
,0x00,0x3f,0xc0,0x00,0x00,0x07,0xf8,0x00
,0x00,0x7f,0x00,0x01,0x00,0x01,0xfc,0x00
,0x00,0x7e,0x00,0x7f,0xfc,0x00,0xfc,0x00
,0x00,0x3c,0x03,0xff,0xff,0x80,0x78,0x00
,0x00,0x00,0x07,0xff,0xff,0xc0,0x00,0x00
,0x00,0x00,0x1f,0xff,0xff,0xf0,0x00,0x00
,0x00,0x00,0x3f,0xf0,0x1f,0xf8,0x00,0x00
,0x00,0x00,0x3f,0x80,0x03,0xf8,0x00,0x00
,0x00,0x00,0x3f,0x00,0x01,0xf8,0x00,0x00
,0x00,0x00,0x1c,0x00,0x00,0x70,0x00,0x00
,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x0f,0xe0,0x00,0x00,0x00
,0x00,0x00,0x00,0x1f,0xf0,0x00,0x00,0x00
,0x00,0x00,0x00,0x3f,0xf8,0x00,0x00,0x00
,0x00,0x00,0x00,0x3f,0xf8,0x00,0x00,0x00
,0x00,0x00,0x00,0x3f,0xf8,0x00,0x00,0x00
,0x00,0x00,0x00,0x3f,0xf8,0x00,0x00,0x00
,0x00,0x00,0x00,0x1f,0xf0,0x00,0x00,0x00
,0x00,0x00,0x00,0x0f,0xe0,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};
#define FinPr_start_width 64
#define FinPr_start_height 64
const uint8_t PROGMEM FinPr_start_bits[] = {
  0x00,0x00,0x00,0x1f,0xe0,0x00,0x00,0x00
,0x00,0x00,0x01,0xff,0xfe,0x00,0x00,0x00
,0x00,0x00,0x03,0xff,0xff,0x80,0x00,0x00
,0x00,0x00,0x0f,0xc0,0x0f,0xe0,0x00,0x00
,0x00,0x00,0x1f,0x00,0x01,0xf8,0x00,0x00
,0x00,0x00,0x3c,0x00,0x00,0x7c,0x00,0x00
,0x00,0x00,0x78,0x00,0x00,0x3e,0x00,0x00
,0x00,0x00,0xf0,0x3f,0xf8,0x0f,0x00,0x00
,0x00,0x01,0xe0,0xff,0xfe,0x07,0x80,0x00
,0x00,0x03,0xc3,0xff,0xff,0x03,0x80,0x00
,0x00,0x03,0x87,0xc0,0x07,0xc3,0xc0,0x00
,0x00,0x07,0x0f,0x00,0x03,0xe1,0xc0,0x00
,0x00,0x0f,0x0e,0x00,0x00,0xe0,0xe0,0x00
,0x00,0x0e,0x1c,0x00,0x00,0xf0,0xe0,0x00
,0x00,0x0c,0x3c,0x1f,0xe0,0x70,0xe0,0x00
,0x00,0x00,0x38,0x3f,0xf0,0x38,0x70,0x00
,0x00,0x00,0x78,0x78,0xf8,0x38,0x70,0x00
,0x00,0x00,0x70,0x70,0x3c,0x18,0x70,0x00
,0x00,0x00,0xe0,0xe0,0x1e,0x1c,0x70,0x00
,0x00,0x03,0xe1,0xe0,0x0e,0x1c,0x70,0x00
,0x00,0x0f,0xc1,0xc3,0x0e,0x1c,0x70,0x00
,0x00,0x3f,0x03,0xc3,0x8e,0x1c,0x70,0x00
,0x00,0x3e,0x03,0x87,0x0e,0x1c,0x70,0x00
,0x00,0x30,0x07,0x07,0x0e,0x18,0xe0,0x00
,0x00,0x00,0x0e,0x0e,0x0e,0x38,0xe0,0x00
,0x00,0x00,0x3e,0x1e,0x1e,0x38,0xe0,0x00
,0x00,0x00,0xf8,0x1c,0x1c,0x38,0xe0,0x00
,0x00,0x03,0xf0,0x38,0x3c,0x38,0xe0,0x00
,0x00,0x3f,0xc0,0xf8,0x78,0x38,0xe0,0x00
,0x00,0x7f,0x01,0xf0,0x70,0x38,0xf0,0x00
,0x00,0x78,0x03,0xe0,0xe0,0x38,0x70,0x00
,0x00,0x00,0x0f,0x81,0xe0,0x38,0x7c,0x00
,0x00,0x00,0x3f,0x03,0xc0,0x38,0x3e,0x00
,0x00,0x00,0xfc,0x0f,0x80,0x38,0x1e,0x00
,0x00,0x07,0xf0,0x1f,0x1c,0x1c,0x04,0x00
,0x00,0x3f,0xc0,0x3e,0x3f,0x1e,0x00,0x00
,0x00,0x7f,0x00,0xf8,0x7f,0x0f,0x00,0x00
,0x00,0x38,0x01,0xf0,0xf7,0x07,0xc0,0x00
,0x00,0x00,0x07,0xe1,0xe3,0x83,0xf8,0x00
,0x00,0x00,0x3f,0x87,0xc3,0xc0,0xfc,0x00
,0x00,0x01,0xfe,0x0f,0x81,0xe0,0x3c,0x00
,0x00,0x0f,0xf8,0x1f,0x00,0xf0,0x00,0x00
,0x00,0x1f,0xc0,0x7c,0x00,0x7c,0x00,0x00
,0x00,0x1e,0x01,0xf8,0x00,0x3f,0x00,0x00
,0x00,0x00,0x07,0xe0,0x78,0x0f,0xc0,0x00
,0x00,0x00,0x3f,0x81,0xfe,0x07,0xf0,0x00
,0x00,0x01,0xfe,0x07,0xff,0x01,0xf0,0x00
,0x00,0x07,0xf8,0x0f,0x87,0x80,0x30,0x00
,0x00,0x07,0xc0,0x3f,0x03,0xe0,0x00,0x00
,0x00,0x06,0x00,0xfc,0x01,0xf8,0x00,0x00
,0x00,0x00,0x03,0xf0,0x00,0x7e,0x00,0x00
,0x00,0x00,0x0f,0xc0,0x00,0x3f,0x80,0x00
,0x00,0x00,0x7f,0x00,0xf8,0x0f,0x80,0x00
,0x00,0x00,0xfc,0x03,0xfe,0x01,0x80,0x00
,0x00,0x00,0xf0,0x1f,0xff,0x80,0x00,0x00
,0x00,0x00,0x00,0x7f,0x07,0xe0,0x00,0x00
,0x00,0x00,0x00,0xfc,0x03,0xf8,0x00,0x00
,0x00,0x00,0x03,0xf0,0x00,0x78,0x00,0x00
,0x00,0x00,0x0f,0xc0,0x00,0x18,0x00,0x00
,0x00,0x00,0x0f,0x01,0xf8,0x00,0x00,0x00
,0x00,0x00,0x00,0x07,0xfe,0x00,0x00,0x00
,0x00,0x00,0x00,0x1f,0xfe,0x00,0x00,0x00
,0x00,0x00,0x00,0x1e,0x0e,0x00,0x00,0x00
,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x00
};
//---------------------------------------------------------------
#define FinPr_valid_width 64
#define FinPr_valid_height 64
const uint8_t PROGMEM FinPr_valid_bits[] = {
  0x00,0x00,0x03,0xfe,0x00,0x00,0x00,0x00
,0x00,0x00,0x1f,0xff,0xe0,0x00,0x00,0x00
,0x00,0x00,0x7f,0xff,0xf8,0x00,0x00,0x00
,0x00,0x00,0xfc,0x00,0xfe,0x00,0x00,0x00
,0x00,0x03,0xe0,0x00,0x1f,0x00,0x00,0x00
,0x00,0x07,0xc0,0x00,0x07,0x80,0x00,0x00
,0x00,0x0f,0x80,0x00,0x03,0xe0,0x00,0x00
,0x00,0x0e,0x03,0xff,0x01,0xe0,0x00,0x00
,0x00,0x1c,0x1f,0xff,0xe0,0xf0,0x00,0x00
,0x00,0x3c,0x3f,0xff,0xf0,0x78,0x00,0x00
,0x00,0x78,0x7c,0x00,0xf8,0x3c,0x00,0x00
,0x00,0x70,0xf0,0x00,0x3c,0x1c,0x00,0x00
,0x00,0xe1,0xe0,0x00,0x1e,0x1c,0x00,0x00
,0x00,0xe1,0xc0,0x00,0x0f,0x0e,0x00,0x00
,0x00,0xc3,0x81,0xfc,0x07,0x0e,0x00,0x00
,0x00,0x03,0x83,0xff,0x07,0x8e,0x00,0x00
,0x00,0x07,0x07,0x8f,0x83,0x87,0x00,0x00
,0x00,0x0f,0x0f,0x03,0xc3,0x87,0x00,0x00
,0x00,0x1e,0x0e,0x01,0xc3,0x87,0x00,0x00
,0x00,0x3c,0x1c,0x00,0xe1,0x87,0x00,0x00
,0x00,0xf8,0x1c,0x30,0xe1,0x87,0x00,0x00
,0x07,0xf0,0x38,0x70,0xe1,0x86,0x00,0x00
,0x07,0xc0,0x78,0x70,0xe3,0x8e,0x00,0x00
,0x02,0x00,0xf0,0xf0,0xe3,0x8e,0x00,0x00
,0x00,0x01,0xe0,0xe0,0xe3,0x8e,0x00,0x00
,0x00,0x03,0xc1,0xe1,0xc3,0x8e,0x00,0x00
,0x00,0x0f,0x83,0xc3,0xc3,0x8e,0x00,0x00
,0x00,0x7f,0x07,0x83,0x83,0x0e,0x00,0x00
,0x07,0xfc,0x0f,0x07,0x83,0x0e,0x00,0x00
,0x07,0xf0,0x1e,0x0f,0x03,0x0e,0x00,0x00
,0x07,0x80,0x7c,0x1e,0x03,0x07,0x00,0x00
,0x00,0x00,0xf8,0x3c,0x03,0x87,0x80,0x00
,0x00,0x03,0xf0,0x78,0x03,0x83,0xc0,0x00
,0x00,0x1f,0xc0,0xf0,0x02,0x00,0x00,0x00
,0x00,0xff,0x01,0xe1,0xc0,0x0c,0x00,0x00
,0x07,0xfc,0x03,0xc3,0xe1,0xff,0xc0,0x00
,0x07,0xe0,0x0f,0x87,0xc7,0xff,0xf0,0x00
,0x07,0x00,0x3f,0x0f,0x0f,0xff,0xfc,0x00
,0x00,0x00,0x7c,0x3e,0x3f,0xff,0xfe,0x00
,0x00,0x03,0xf8,0x7c,0x3f,0xff,0xff,0x00
,0x00,0x1f,0xe0,0xf0,0x7f,0xff,0xff,0x80
,0x00,0xff,0x83,0xe0,0xff,0xff,0xff,0x80
,0x01,0xfc,0x07,0xc1,0xff,0xff,0xe3,0xc0
,0x01,0xe0,0x1f,0x01,0xff,0xff,0xc3,0xc0
,0x00,0x00,0xfe,0x01,0xff,0xff,0x87,0xe0
,0x00,0x03,0xf8,0x13,0xff,0xff,0x0f,0xe0
,0x00,0x1f,0xe0,0x73,0xff,0xfe,0x1f,0xe0
,0x00,0x7f,0x81,0xf3,0xff,0xfc,0x1f,0xe0
,0x00,0xfc,0x03,0xe3,0xef,0xf8,0x3f,0xe0
,0x00,0x60,0x0f,0xc3,0xc7,0xf0,0x7f,0xe0
,0x00,0x00,0x3f,0x03,0xc3,0xe0,0xff,0xe0
,0x00,0x00,0xfc,0x03,0xc1,0xc1,0xff,0xe0
,0x00,0x07,0xf0,0x13,0xe0,0x83,0xff,0xe0
,0x00,0x0f,0xc0,0x7b,0xf8,0x07,0xff,0xe0
,0x00,0x0f,0x01,0xf9,0xfc,0x0f,0xff,0xc0
,0x00,0x00,0x07,0xf1,0xfe,0x1f,0xff,0xc0
,0x00,0x00,0x1f,0xc0,0xff,0x3f,0xff,0x80
,0x00,0x00,0x7e,0x00,0xff,0xff,0xff,0x80
,0x00,0x00,0xfc,0x00,0x7f,0xff,0xff,0x00
,0x00,0x00,0xf0,0x1f,0x3f,0xff,0xfe,0x00
,0x00,0x00,0x00,0x7f,0x1f,0xff,0xfc,0x00
,0x00,0x00,0x01,0xff,0x8f,0xff,0xf8,0x00
,0x00,0x00,0x03,0xe0,0xe3,0xff,0xe0,0x00
,0x00,0x00,0x01,0x80,0x00,0x7f,0x00,0x00
};
//---------------------------------------------------------------
#define FinPr_invalid_width 64
#define FinPr_invalid_height 64
const uint8_t PROGMEM FinPr_invalid_bits[] = {
  0x00,0x00,0x03,0xfe,0x00,0x00,0x00,0x00
,0x00,0x00,0x1f,0xff,0xe0,0x00,0x00,0x00
,0x00,0x00,0x7f,0xff,0xf8,0x00,0x00,0x00
,0x00,0x00,0xfc,0x00,0xfe,0x00,0x00,0x00
,0x00,0x03,0xe0,0x00,0x1f,0x00,0x00,0x00
,0x00,0x07,0xc0,0x00,0x07,0x80,0x00,0x00
,0x00,0x0f,0x80,0x00,0x03,0xe0,0x00,0x00
,0x00,0x0e,0x03,0xff,0x01,0xe0,0x00,0x00
,0x00,0x1c,0x1f,0xff,0xe0,0xf0,0x00,0x00
,0x00,0x3c,0x3f,0xff,0xf0,0x78,0x00,0x00
,0x00,0x78,0x7c,0x00,0xf8,0x3c,0x00,0x00
,0x00,0x70,0xf0,0x00,0x3c,0x1c,0x00,0x00
,0x00,0xe1,0xe0,0x00,0x1e,0x1c,0x00,0x00
,0x00,0xe1,0xc0,0x00,0x0f,0x0e,0x00,0x00
,0x00,0xc3,0x81,0xfc,0x07,0x0e,0x00,0x00
,0x00,0x03,0x83,0xff,0x07,0x8e,0x00,0x00
,0x00,0x07,0x07,0x8f,0x83,0x87,0x00,0x00
,0x00,0x0f,0x0f,0x03,0xc3,0x87,0x00,0x00
,0x00,0x1e,0x0e,0x01,0xc3,0x87,0x00,0x00
,0x00,0x3c,0x1c,0x00,0xe1,0x87,0x00,0x00
,0x00,0xf8,0x1c,0x30,0xe1,0x87,0x00,0x00
,0x07,0xf0,0x38,0x70,0xe1,0x86,0x00,0x00
,0x07,0xc0,0x78,0x70,0xe3,0x8e,0x00,0x00
,0x02,0x00,0xf0,0xf0,0xe3,0x8e,0x00,0x00
,0x00,0x01,0xe0,0xe0,0xe3,0x8e,0x00,0x00
,0x00,0x03,0xc1,0xe1,0xc3,0x8e,0x00,0x00
,0x00,0x0f,0x83,0xc3,0xc3,0x8e,0x00,0x00
,0x00,0x7f,0x07,0x83,0x83,0x0e,0x00,0x00
,0x07,0xfc,0x0f,0x07,0x83,0x0e,0x00,0x00
,0x07,0xf0,0x1e,0x0f,0x03,0x0e,0x00,0x00
,0x07,0x80,0x7c,0x1e,0x03,0x07,0x00,0x00
,0x00,0x00,0xf8,0x3c,0x03,0x87,0x80,0x00
,0x00,0x03,0xf0,0x78,0x03,0x83,0xc0,0x00
,0x00,0x1f,0xc0,0xf0,0x02,0x00,0x00,0x00
,0x00,0xff,0x01,0xe1,0xc0,0x00,0x00,0x00
,0x07,0xfc,0x03,0xc3,0xe1,0xff,0xc0,0x00
,0x07,0xe0,0x0f,0x87,0xc7,0xff,0xf0,0x00
,0x07,0x00,0x3f,0x0f,0x0f,0xff,0xf8,0x00
,0x00,0x00,0x7c,0x3e,0x1f,0xff,0xfe,0x00
,0x00,0x03,0xf8,0x7c,0x3f,0xff,0xff,0x00
,0x00,0x1f,0xe0,0xf0,0x7f,0xff,0xff,0x00
,0x00,0xff,0x83,0xe0,0xfe,0xff,0xbf,0x80
,0x01,0xfc,0x07,0xc0,0xfc,0x7f,0x1f,0xc0
,0x01,0xe0,0x1f,0x01,0xf8,0x3e,0x0f,0xc0
,0x00,0x00,0xfe,0x01,0xf8,0x1c,0x07,0xe0
,0x00,0x03,0xf8,0x13,0xf8,0x00,0x0f,0xe0
,0x00,0x1f,0xe0,0x73,0xfc,0x00,0x1f,0xe0
,0x00,0x7f,0x81,0xf3,0xfe,0x00,0x3f,0xe0
,0x00,0xfc,0x03,0xe3,0xff,0x00,0x7f,0xe0
,0x00,0x60,0x0f,0xc3,0xff,0x80,0xff,0xe0
,0x00,0x00,0x3f,0x03,0xff,0x00,0x7f,0xe0
,0x00,0x00,0xfc,0x03,0xfe,0x00,0x3f,0xe0
,0x00,0x07,0xf0,0x13,0xfc,0x00,0x1f,0xe0
,0x00,0x0f,0xc0,0x79,0xf8,0x08,0x0f,0xe0
,0x00,0x0f,0x01,0xf9,0xf8,0x1c,0x0f,0xc0
,0x00,0x00,0x07,0xf1,0xfc,0x3e,0x1f,0xc0
,0x00,0x00,0x1f,0xc0,0xfe,0x7f,0x3f,0x80
,0x00,0x00,0x7e,0x00,0xff,0xff,0xff,0x80
,0x00,0x00,0xfc,0x00,0x7f,0xff,0xff,0x00
,0x00,0x00,0xf0,0x1f,0x3f,0xff,0xfe,0x00
,0x00,0x00,0x00,0x7f,0x1f,0xff,0xfc,0x00
,0x00,0x00,0x01,0xff,0x8f,0xff,0xf8,0x00
,0x00,0x00,0x03,0xe0,0xe3,0xff,0xe0,0x00
,0x00,0x00,0x01,0x80,0x00,0x7f,0x00,0x00
};
//---------------------------------------------------------------
#define FinPr_failed_width 64
#define FinPr_failed_height 64
const uint8_t PROGMEM FinPr_failed_bits[] = {
0x00,0x00,0x3f,0xe0,0x00,0x00,0x00,0x00
,0x00,0x01,0xff,0xfe,0x00,0x00,0x00,0x00
,0x00,0x0f,0xc0,0x1f,0x80,0x00,0x00,0x00
,0x00,0x1e,0x00,0x03,0xc0,0x00,0x00,0x00
,0x00,0x78,0x00,0x00,0xf0,0x00,0x00,0x00
,0x00,0xe0,0x00,0x00,0x38,0x00,0x00,0x00
,0x01,0xc0,0x00,0x00,0x1c,0x00,0x00,0x00
,0x03,0x80,0x00,0x00,0x0e,0x00,0x00,0x00
,0x07,0x00,0x7f,0xe0,0x07,0x00,0x00,0x00
,0x06,0x01,0xff,0xf8,0x03,0x00,0x00,0x00
,0x0c,0x03,0xc0,0x3c,0x03,0x80,0x00,0x00
,0x1c,0x0f,0x00,0x0e,0x01,0x80,0x00,0x00
,0x18,0x0c,0x00,0x03,0x00,0xc0,0x00,0x00
,0x18,0x18,0x00,0x01,0x80,0xc0,0x00,0x00
,0x30,0x38,0x00,0x01,0xc0,0xe0,0x00,0x00
,0x30,0x30,0x0f,0x00,0xc0,0x60,0x00,0x00
,0x30,0x30,0x3f,0xc0,0xe0,0x60,0x00,0x00
,0x70,0x60,0x78,0xe0,0x60,0x60,0x00,0x00
,0x60,0x60,0x60,0x60,0x60,0x70,0x00,0x00
,0x60,0x60,0x60,0x60,0x60,0x30,0x00,0x00
,0x60,0x60,0x60,0x60,0x30,0x30,0x00,0x00
,0x60,0x60,0x60,0x30,0x30,0x20,0x00,0x00
,0x60,0x60,0x60,0x30,0x30,0x01,0xe0,0x00
,0x60,0x60,0x60,0x30,0x30,0x0f,0xfc,0x00
,0x60,0x60,0x60,0x30,0x30,0x3f,0xff,0x00
,0x60,0x60,0x60,0x30,0x18,0x78,0x03,0x80
,0x60,0x60,0x60,0x30,0x1c,0x60,0x01,0x80
,0x60,0x60,0x30,0x38,0x0c,0xc0,0x00,0xc0
,0x00,0x60,0x30,0x18,0x00,0xc0,0x00,0xc0
,0x00,0x60,0x30,0x18,0x00,0xc0,0x00,0xc0
,0x00,0xe0,0x30,0x0c,0x01,0xc0,0x00,0xe0
,0x00,0xc0,0x18,0x0e,0x01,0xc0,0x00,0xe0
,0x60,0xc0,0x18,0x07,0x01,0xc0,0x00,0xe0
,0x01,0xc0,0x1c,0x03,0x81,0xc0,0x00,0xe0
,0x01,0x80,0x0c,0x01,0xc1,0xc0,0x00,0xe0
,0x03,0x80,0x0e,0x00,0xf1,0xc0,0x00,0xe0
,0x0f,0x00,0x06,0x00,0x01,0xc0,0x00,0xe0
,0x3e,0x01,0x03,0x00,0x01,0xc0,0x00,0xe0
,0x30,0x03,0x83,0x80,0x1f,0xff,0xff,0xfe
,0x00,0x03,0x81,0xc0,0x3f,0xff,0xff,0xff
,0x00,0x07,0xc0,0xe0,0x30,0x00,0x00,0x03
,0x00,0x0e,0xc0,0x78,0x30,0x00,0x00,0x03
,0x00,0x3c,0x60,0x1e,0x30,0x00,0x00,0x03
,0x00,0x78,0x70,0x0f,0x30,0x00,0x00,0x03
,0x03,0xe0,0x38,0x03,0x30,0x00,0x00,0x03
,0x07,0x80,0x1c,0x00,0x30,0x00,0x00,0x03
,0xc0,0x00,0x0f,0x00,0x30,0x00,0x00,0x03
,0xc0,0x00,0x03,0x80,0x30,0x01,0xe0,0x03
,0x00,0x18,0x01,0xe0,0x30,0x03,0xf0,0x03
,0x00,0x18,0x00,0x7c,0x30,0x07,0x38,0x03
,0x00,0x0c,0x00,0x1f,0x30,0x06,0x18,0x03
,0x18,0x0e,0x00,0x07,0x30,0x06,0x18,0x03
,0x0c,0x07,0x80,0x00,0x30,0x07,0x38,0x03
,0x0e,0x03,0xc0,0x00,0x30,0x03,0x30,0x03
,0x07,0x00,0xf0,0x00,0x30,0x03,0x30,0x03
,0x03,0x00,0x7e,0x00,0x30,0x03,0x30,0x03
,0x01,0x80,0x1f,0xc0,0x30,0x03,0x30,0x03
,0x01,0xc0,0x03,0xe1,0x30,0x07,0xf8,0x03
,0x00,0xf0,0x00,0x01,0x30,0x03,0xf0,0x03
,0x00,0x38,0x00,0x00,0x30,0x00,0x00,0x03
,0x00,0x1e,0x00,0x00,0x30,0x00,0x00,0x03
,0x00,0x07,0xc0,0x00,0x30,0x00,0x00,0x03
,0x00,0x01,0xff,0x80,0x3f,0xff,0xff,0xff
,0x00,0x00,0x3f,0x80,0x1f,0xff,0xff,0xfe
};
//---------------------------------------------------------------
#define FinPr_scan_width 64
#define FinPr_scan_height 64
const uint8_t PROGMEM FinPr_scan_bits[] = {
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x1f,0xf8,0x00,0x00,0x00
,0x00,0x00,0x00,0x7f,0xff,0x00,0x00,0x00
,0x00,0x00,0x01,0xfc,0x7f,0xc0,0x00,0x00
,0x00,0x00,0x03,0xc0,0x03,0xe0,0x00,0x00
,0x00,0x00,0x07,0x80,0x00,0xf0,0x00,0x00
,0x00,0x00,0x0e,0x00,0x00,0x3c,0x00,0x00
,0x00,0x00,0x1c,0x1f,0xfc,0x1c,0x00,0x00
,0x00,0x00,0x38,0x7f,0xfe,0x0e,0x00,0x00
,0x00,0x00,0x78,0xf8,0x0f,0x87,0x00,0x00
,0x00,0x00,0x71,0xe0,0x03,0xc7,0x00,0x00
,0x00,0x00,0xe3,0x80,0x01,0xc3,0x80,0x00
,0x00,0x00,0xc3,0x83,0xc0,0xe3,0x80,0x00
,0x00,0x00,0xc7,0x0f,0xf0,0x71,0x80,0x00
,0x00,0x00,0x06,0x1f,0xf8,0x71,0xc0,0x00
,0x00,0x00,0x0e,0x1c,0x3c,0x31,0xc0,0x00
,0x00,0x00,0x1c,0x38,0x1c,0x31,0xc0,0x00
,0x00,0x00,0x38,0x70,0x0e,0x39,0xc0,0x00
,0x00,0x01,0xf0,0x71,0x8e,0x39,0xc0,0x00
,0x00,0x03,0xe0,0xe1,0x86,0x31,0xc0,0x00
,0x00,0x03,0x81,0xe3,0x8e,0x31,0x80,0x00
,0x00,0x00,0x03,0xc3,0x8e,0x33,0x80,0x00
,0x00,0x00,0x07,0x87,0x0c,0x73,0x80,0x00
,0x00,0x00,0x1f,0x0e,0x1c,0x73,0x80,0x00
,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xfe
,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff
,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff
,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xfe
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x03,0xf0,0x1e,0x3e,0x1c,0x00,0x00
,0x00,0x03,0x80,0x7c,0x77,0x0f,0x00,0x00
,0x00,0x00,0x01,0xf0,0xe3,0x07,0xc0,0x00
,0x00,0x00,0x07,0xe3,0xc3,0x81,0xf0,0x00
,0x00,0x00,0x3f,0x87,0x81,0xc0,0x60,0x00
,0x00,0x01,0xfc,0x1f,0x00,0xf0,0x00,0x00
,0x00,0x01,0xe0,0x3c,0x00,0x7c,0x00,0x00
,0x00,0x00,0x00,0xf8,0x78,0x1f,0x00,0x00
,0x00,0x00,0x07,0xe0,0xfc,0x0f,0xc0,0x00
,0x00,0x00,0x3f,0x83,0xef,0x03,0xc0,0x00
,0x00,0x00,0xfc,0x0f,0x87,0x80,0x00,0x00
,0x00,0x00,0x70,0x1f,0x03,0xe0,0x00,0x00
,0x00,0x00,0x00,0x7c,0x00,0xf8,0x00,0x00
,0x00,0x00,0x01,0xf0,0x00,0x3e,0x00,0x00
,0x00,0x00,0x0f,0xc0,0xf8,0x0f,0x00,0x00
,0x00,0x00,0x1f,0x03,0xfe,0x02,0x00,0x00
,0x00,0x00,0x0c,0x0f,0x8f,0x80,0x00,0x00
,0x00,0x00,0x00,0x3f,0x03,0xe0,0x00,0x00
,0x00,0x00,0x00,0xf8,0x00,0xf0,0x00,0x00
,0x00,0x00,0x01,0xe0,0x00,0x30,0x00,0x00
,0x00,0x00,0x01,0xc0,0xf8,0x00,0x00,0x00
,0x00,0x00,0x00,0x07,0xfe,0x00,0x00,0x00
,0x00,0x00,0x00,0x0f,0x8e,0x00,0x00,0x00
,0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};
//************************************************************************
void setup() {
  Serial.begin(115200);
  delay(1000);
   pinMode(led_blue, LOW);
    pinMode(led_green, LOW);
    
  //-----------initiate OLED display-------------
  if(!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) { // Address 0x3D for 128x64
    Serial.println(F("SSD1306 allocation failed"));
    for(;;); // Don't proceed, loop forever
  }
  // you can delet these three lines if you don't want to get the Adfruit logo appear
  display.display();
  delay(2000); // Pause for 2 seconds
  display.clearDisplay();
  //---------------------------------------------
  connectToWiFi();
  //---------------------------------------------
  // Set the data rate for the sensor serial port
  finger.begin(57600);
  Serial.println("\n\nAdafruit finger detect test");
  if (finger.verifyPassword()) {
    Serial.println("Found fingerprint sensor!");
    display.clearDisplay();
    display.drawBitmap( 34, 0, FinPr_valid_bits, FinPr_valid_width, FinPr_valid_height, WHITE);
    display.display();
  } else {
    Serial.println("Did not find fingerprint sensor :(");
    display.clearDisplay();
    display.drawBitmap( 32, 0, FinPr_failed_bits, FinPr_failed_width, FinPr_failed_height, WHITE);
    display.display();
    while (1) { delay(1); }
  }
  //---------------------------------------------
  finger.getTemplateCount();
  Serial.print("Sensor contains "); Serial.print(finger.templateCount); Serial.println(" templates");
  Serial.println("Waiting for valid finger...");
  //Timers---------------------------------------
  timer.setInterval(25000L, CheckMode);
  t1 = timer.setInterval(10000L, ChecktoAddID);      //Set an internal timer every 10sec to check if there a new fingerprint in the website to add it.
  t2 = timer.setInterval(15000L, ChecktoDeleteID);   //Set an internal timer every 15sec to check wheater there an ID to delete in the website.
  //---------------------------------------------
  CheckMode();
}
//************************************************************************
void loop() {
  timer.run();      //Keep the timer in the loop function in order to update the time as soon as possible
  //check if there's a connection to Wi-Fi or not
  if(!WiFi.isConnected()){
    if (millis() - previousMillis >= 10000) {
      previousMillis = millis();
      connectToWiFi();    //Retry to connect to Wi-Fi
    }
  }
  CheckFingerprint();   //Check the sensor if the there a finger.
  delay(10);
}
//************************************************************************
void CheckFingerprint(){
//  unsigned long previousMillisM = millis();
//  Serial.println(previousMillisM);
  // If there no fingerprint has been scanned return -1 or -2 if there an error or 0 if there nothing, The ID start form 1 to 127
  // Get the Fingerprint ID from the Scanner
  FingerID = getFingerprintID();
  DisplayFingerprintID();
//  Serial.println(millis() - previousMillisM);
  
}
//************Display the fingerprint ID state on the OLED*************
void DisplayFingerprintID(){
   Serial.println(FingerID);
  //Fingerprint has been detected 
  if (FingerID > 0){
    display.clearDisplay();
    display.drawBitmap( 34, 0, FinPr_valid_bits, FinPr_valid_width, FinPr_valid_height, WHITE);
    display.display();
    SendFingerprintID( FingerID ); // Send the Fingerprint ID to the website.
    delay(2000);
  }
  //---------------------------------------------
  //No finger detected
  else if (FingerID == 0){
    display.clearDisplay();
    display.drawBitmap( 32, 0, FinPr_start_bits, FinPr_start_width, FinPr_start_height, WHITE);
    display.display();
  }
  //---------------------------------------------
  //Didn't find a match
  else if (FingerID == -1){
    display.clearDisplay();
    display.drawBitmap( 34, 0, FinPr_invalid_bits, FinPr_invalid_width, FinPr_invalid_height, WHITE);
    display.display();
  }
  //---------------------------------------------
  //Didn't find the scanner or there an error
  else if (FingerID == -2){
    display.clearDisplay();
    display.drawBitmap( 32, 0, FinPr_failed_bits, FinPr_failed_width, FinPr_failed_height, WHITE);
    display.display();
  }
}
//************send the fingerprint ID to the website*************
void SendFingerprintID( int finger ){
  Serial.println("Sending the Fingerprint ID");
  if(WiFi.isConnected()){
    HTTPClient http;    //Declare object of class HTTPClient
    //GET Data
    getData = "?FingerID=" + String(finger) + "&device_token=" + device_token; // Add the Fingerprint ID to the Post array in order to send it
    //GET methode
    Link = URL + getData;
    http.begin(Link); //initiate HTTP request   //Specify content-type header
    
    int httpCode = http.GET();   //Send the request
    String payload = http.getString();    //Get the response payload
    
    Serial.println(httpCode);   //Print HTTP return code
    Serial.println(payload);    //Print request response payload
    Serial.println(finger);     //Print fingerprint ID
  
    if (payload.substring(0, 5) == "login") {
      String user_name = payload.substring(5);
  //  Serial.println(user_name);
         pinMode(led_blue, LOW);
    pinMode(led_green,HIGH );
      display.clearDisplay();
      display.setTextSize(2);             // Normal 2:2 pixel scale
      display.setTextColor(WHITE);        // Draw white text
      display.setCursor(15,0);             // Start at top-left corner
      display.print(F("Welcome"));
      display.setCursor(0,20);
      display.print(user_name);
      display.display();
      
    }
    else if (payload.substring(0, 6) == "logout") {
      String user_name = payload.substring(6);
  //  Serial.println(user_name);
          pinMode(led_blue, LOW);
    pinMode(led_green,HIGH );
      display.clearDisplay();
      display.setTextSize(2);             // Normal 2:2 pixel scale
      display.setTextColor(WHITE);        // Draw white text
      display.setCursor(10,0);             // Start at top-left corner
      display.print(F("Good Bye"));
      display.setCursor(0,20);
      display.print(user_name);
      display.display();
    }
    delay(10);
    http.end();  //Close connection
  }
}
//********************Get the Fingerprint ID******************
int  getFingerprintID() {
   int  p = finger.getImage();
  switch (p) {
    case FINGERPRINT_OK:
      //Serial.println("Image taken");
      break;
    case FINGERPRINT_NOFINGER:
      //Serial.println("No finger detected");
      return 0;
    case FINGERPRINT_PACKETRECIEVEERR:
      //Serial.println("Communication error");
      return -2;
    case FINGERPRINT_IMAGEFAIL:
      //Serial.println("Imaging error");
      return -2;
    default:
      //Serial.println("Unknown error");
      return -2;
  }
  // OK success!
  p = finger.image2Tz();
  switch (p) {
    case FINGERPRINT_OK:
      //Serial.println("Image converted");
      break;
    case FINGERPRINT_IMAGEMESS:
      //Serial.println("Image too messy");
      return -1;
    case FINGERPRINT_PACKETRECIEVEERR:
      //Serial.println("Communication error");
      return -2;
    case FINGERPRINT_FEATUREFAIL:
      //Serial.println("Could not find fingerprint features");
      return -2;
    case FINGERPRINT_INVALIDIMAGE:
      //Serial.println("Could not find fingerprint features");
      return -2;
    default:
      //Serial.println("Unknown error");
      return -2;
  }
  // OK converted!
  p = finger.fingerFastSearch();
  if (p == FINGERPRINT_OK) {
    //Serial.println("Found a print match!");
  } else if (p == FINGERPRINT_PACKETRECIEVEERR) {
    //Serial.println("Communication error");
    return -2;
  } else if (p == FINGERPRINT_NOTFOUND) {
    //Serial.println("Did not find a match");
    return -1;
  } else {
    //Serial.println("Unknown error");
    return -2;
  }   
  // found a match!
  Serial.print("Found ID #"); Serial.print(finger.fingerID); 
  Serial.print(" with confidence of "); Serial.println(finger.confidence); 
  return finger.fingerID;
}
//******************Check if there a Fingerprint ID to delete******************
void ChecktoDeleteID(){
  Serial.println("Check to Delete ID");
  if(WiFi.isConnected()){
    HTTPClient http;    //Declare object of class HTTPClient
    //GET Data
    getData = "?DeleteID=check&device_token=" + String(device_token); // Add the Fingerprint ID to the Post array in order to send it
    //GET methode
    Link = URL + getData;
    http.begin(Link); //initiate HTTP request,
//    Serial.println(Link);
    int httpCode = http.GET();   //Send the request
    String payload = http.getString();    //Get the response payload
  
    if (payload.substring(0, 6) == "del-id") {
      String del_id = payload.substring(6);
      Serial.println(del_id);
      http.end();  //Close connection
      deleteFingerprint( del_id.toInt() );
      delay(1000);
    }
    http.end();  //Close connection
  }
}
//******************Delete Finpgerprint ID*****************
 int deleteFingerprint( int id) {
   int p = -1;
  
  p = finger.deleteModel(id);
  if (p == FINGERPRINT_OK) {
    //Serial.println("Deleted!");
    display.clearDisplay();
    display.setTextSize(2);             // Normal 2:2 pixel scale
    display.setTextColor(WHITE);        // Draw white text
    display.setCursor(0,0);             // Start at top-left corner
    display.print(F("Deleted!\n"));
    display.display();
  } else if (p == FINGERPRINT_PACKETRECIEVEERR) {
    //Serial.println("Communication error");
    display.clearDisplay();
    display.setTextSize(1);             // Normal 1:1 pixel scale
    display.setTextColor(WHITE);        // Draw white text
    display.setCursor(0,0);             // Start at top-left corner
    display.print(F("Communication error!\n"));
    display.display();
    return p;
  } else if (p == FINGERPRINT_BADLOCATION) {
    //Serial.println("Could not delete in that location");
    display.clearDisplay();
    display.setTextSize(1);             // Normal 1:1 pixel scale
    display.setTextColor(WHITE);        // Draw white text
    display.setCursor(0,0);             // Start at top-left corner
    display.print(F("Could not delete in that location!\n"));
    display.display();
    return p;
  } else if (p == FINGERPRINT_FLASHERR) {
    //Serial.println("Error writing to flash");
    display.clearDisplay();
    display.setTextSize(1);             // Normal 1:1 pixel scale
    display.setTextColor(WHITE);        // Draw white text
    display.setCursor(0,0);             // Start at top-left corner
    display.print(F("Error writing to flash!\n"));
    display.display();
    return p;
  } else {
    //Serial.print("Unknown error: 0x"); Serial.println(p, HEX);
    display.clearDisplay();
    display.setTextSize(2);             // Normal 2:2 pixel scale
    display.setTextColor(WHITE);        // Draw white text
    display.setCursor(0,0);             // Start at top-left corner
    display.print(F("Unknown error:\n"));
    display.display();
    return p;
  }   
}
//******************Check if there a Fingerprint ID to add******************
void ChecktoAddID(){
//  Serial.println("Check to Add ID");
  if(WiFi.isConnected()){
    HTTPClient http;    //Declare object of class HTTPClient
    //GET Data
    getData = "?Get_Fingerid=get_id&device_token=" + String(device_token); // Add the Fingerprint ID to the Post array in order to send it
    //GET methode
    Link = URL + getData;
    http.begin(Link); //initiate HTTP request,
//    Serial.println(Link);
    int httpCode = http.GET();   //Send the request
    String payload = http.getString();    //Get the response payload
  
    if (payload.substring(0, 6) == "add-id") {
      String add_id = payload.substring(6);
      Serial.println(add_id);
      id = add_id.toInt();
      http.end();  //Close connection
      getFingerprintEnroll();
    }
    http.end();  //Close connection
  }
}
//******************Check the Mode*****************
void CheckMode(){
  Serial.println("Check Mode");
  if(WiFi.isConnected()){
    HTTPClient http;    //Declare object of class HTTPClient
    //GET Data
    getData = "?Check_mode=get_mode&device_token=" + String(device_token); // Add the Fingerprint ID to the Post array in order to send it
    //GET methode
    Link = URL + getData;
    http.begin(Link); //initiate HTTP request,
//    Serial.println(Link);
    int httpCode = http.GET();   //Send the request
    String payload = http.getString();    //Get the response payload
  
    if (payload.substring(0, 4) == "mode") {
      String dev_mode = payload.substring(4);
      int devMode = dev_mode.toInt();
      if(!firstConnect){
        device_Mode = devMode;
        firstConnect = true;
      }
//      Serial.println(dev_mode);
      if(device_Mode && devMode){
        device_Mode = false;
        timer.disable(t1);
        timer.disable(t2);
        Serial.println("Deivce Mode: Attandance");
      }
      else if(!device_Mode && !devMode){
        device_Mode = true;
        timer.enable(t1);
        timer.enable(t2);
        Serial.println("Deivce Mode: Enrollment");
      }
      http.end();  //Close connection
    }
    http.end();  //Close connection
  }
//  Serial.print("Number of Timers: ");
//  Serial.println(timer.getNumTimers());
}
//******************Enroll a Finpgerprint ID*****************
 int getFingerprintEnroll() {
  int p = -1;
  display.clearDisplay();
  display.drawBitmap( 34, 0, FinPr_scan_bits, FinPr_scan_width, FinPr_scan_height, WHITE);
  display.display();
  while (p != FINGERPRINT_OK) {
          
    p = finger.getImage();
    switch (p) {
    case FINGERPRINT_OK:
      //Serial.println("Image taken");
      display.clearDisplay();
      display.drawBitmap( 34, 0, FinPr_valid_bits, FinPr_valid_width, FinPr_valid_height, WHITE);
      display.display();
      break;
    case FINGERPRINT_NOFINGER:
      //Serial.println(".");
      display.setTextSize(1);             // Normal 2:2 pixel scale
      display.setTextColor(WHITE);        // Draw white text
      display.setCursor(0,0);             // Start at top-left corner
      display.print(F("scanning"));
      display.display();
      break;
    case FINGERPRINT_PACKETRECIEVEERR:
      display.clearDisplay();
      display.drawBitmap( 34, 0, FinPr_invalid_bits, FinPr_invalid_width, FinPr_invalid_height, WHITE);
      display.display();
      break;
    case FINGERPRINT_IMAGEFAIL:
      Serial.println("Imaging error");
      break;
    default:
      Serial.println("Unknown error");
      break;
    }
  }
  // OK success!
  p = finger.image2Tz(1);
  switch (p) {
    case FINGERPRINT_OK:
      display.clearDisplay();
      display.drawBitmap( 34, 0, FinPr_valid_bits, FinPr_valid_width, FinPr_valid_height, WHITE);
      display.display();
      break;
    case FINGERPRINT_IMAGEMESS:
      display.clearDisplay();
      display.drawBitmap( 34, 0, FinPr_invalid_bits, FinPr_invalid_width, FinPr_invalid_height, WHITE);
      display.display();
      return p;
    case FINGERPRINT_PACKETRECIEVEERR:
      Serial.println("Communication error");
      return p;
    case FINGERPRINT_FEATUREFAIL:
      Serial.println("Could not find fingerprint features");
      return p;
    case FINGERPRINT_INVALIDIMAGE:
      Serial.println("Could not find fingerprint features");
      return p;
    default:
      Serial.println("Unknown error");
      return p;
  }
  display.clearDisplay();
  display.setTextSize(2);             // Normal 2:2 pixel scale
  display.setTextColor(WHITE);        // Draw white text
  display.setCursor(0,0);             // Start at top-left corner
  display.print(F("Remove"));
  display.setCursor(0,20);
  display.print(F("finger"));
  display.display();
  //Serial.println("Remove finger");
  delay(2000);
  p = 0;
  while (p != FINGERPRINT_NOFINGER) {
    p = finger.getImage();
  }
  Serial.print("ID "); Serial.println(id);
  p = -1;
  display.clearDisplay();
  display.drawBitmap( 34, 0, FinPr_scan_bits, FinPr_scan_width, FinPr_scan_height, WHITE);
  display.display();
  while (p != FINGERPRINT_OK) {
    p = finger.getImage();
    switch (p) {
    case FINGERPRINT_OK:
      //Serial.println("Image taken");
      display.clearDisplay();
      display.drawBitmap( 34, 0, FinPr_valid_bits, FinPr_valid_width, FinPr_valid_height, WHITE);
      display.display();
      break;
    case FINGERPRINT_NOFINGER:
      //Serial.println(".");
      display.setTextSize(1);             // Normal 2:2 pixel scale
      display.setTextColor(WHITE);        // Draw white text
      display.setCursor(0,0);             // Start at top-left corner
      display.print(F("scanning"));
      display.display();
      break;
    case FINGERPRINT_PACKETRECIEVEERR:
      Serial.println("Communication error");
      break;
    case FINGERPRINT_IMAGEFAIL:
      Serial.println("Imaging error");
      break;
    default:
      Serial.println("Unknown error");
      break;
    }
  }
  // OK success!
  p = finger.image2Tz(2);
  switch (p) {
    case FINGERPRINT_OK:
      //Serial.println("Image converted");
      display.clearDisplay();
      display.drawBitmap( 34, 0, FinPr_valid_bits, FinPr_valid_width, FinPr_valid_height, WHITE);
      display.display();
      break;
    case FINGERPRINT_IMAGEMESS:
      //Serial.println("Image too messy");
      display.clearDisplay();
      display.drawBitmap( 34, 0, FinPr_invalid_bits, FinPr_invalid_width, FinPr_invalid_height, WHITE);
      display.display();
      return p;
    case FINGERPRINT_PACKETRECIEVEERR:
      Serial.println("Communication error");
      return p;
    case FINGERPRINT_FEATUREFAIL:
      Serial.println("Could not find fingerprint features");
      return p;
    case FINGERPRINT_INVALIDIMAGE:
      Serial.println("Could not find fingerprint features");
      return p;
    default:
      Serial.println("Unknown error");
      return p;
  }
  
  // OK converted!
  Serial.print("Creating model for #");  Serial.println(id);
  
  p = finger.createModel();
  if (p == FINGERPRINT_OK) {
    Serial.println("Prints matched!");
    display.clearDisplay();
    display.drawBitmap( 34, 0, FinPr_valid_bits, FinPr_valid_width, FinPr_valid_height, WHITE);
    display.display();
  } else if (p == FINGERPRINT_PACKETRECIEVEERR) {
      Serial.println("Communication error");
    return p;
  } else if (p == FINGERPRINT_ENROLLMISMATCH) {
      Serial.println("Fingerprints did not match");
      display.clearDisplay();
      display.drawBitmap( 34, 0, FinPr_invalid_bits, FinPr_invalid_width, FinPr_invalid_height, WHITE);
      display.display();
    return p;
  } else {
      Serial.println("Unknown error");
    return p;
  }   
  
  Serial.print("ID "); Serial.println(id);
  p = finger.storeModel(id);
  if (p == FINGERPRINT_OK) {
    Serial.println("Stored!");
    display.clearDisplay();
    display.drawBitmap( 34, 0, FinPr_valid_bits, FinPr_valid_width, FinPr_valid_height, WHITE);
    display.display();
    confirmAdding(id);
  } else if (p == FINGERPRINT_PACKETRECIEVEERR) {
    Serial.println("Communication error");
    return p;
  } else if (p == FINGERPRINT_BADLOCATION) {
    Serial.println("Could not store in that location");
    return p;
  } else if (p == FINGERPRINT_FLASHERR) {
    Serial.println("Error writing to flash");
    return p;
  } else {
    Serial.println("Unknown error");
    return p;
  }   
}
//******************Check if there a Fingerprint ID to add******************
void confirmAdding(int id){
  Serial.println("confirm Adding");
  if(WiFi.status() == WL_CONNECTED){
    HTTPClient http;    //Declare object of class HTTPClient
    //GET Data
    getData = "?confirm_id=" + String(id) + "&device_token=" + String(device_token); // Add the Fingerprint ID to the Post array in order to send it
    //GET methode
    Link = URL + getData;
    
    http.begin(Link); //initiate HTTP request,
//    Serial.println(Link);
    int httpCode = http.GET();   //Send the request
    String payload = http.getString();    //Get the response payload
    if(httpCode == 200){
      display.clearDisplay();
      display.setTextSize(1.5);             // Normal 1:1 pixel scale
      display.setTextColor(WHITE);        // Draw white text
      display.setCursor(0,0);             // Start at top-left corner
      display.print(payload);
      display.display();
      Serial.println(payload);
      delay(2000);
    }
    else{
      Serial.println("Error Confirm!!");      
    }
    http.end();  //Close connection
  }
}
//********************connect to the WiFi******************
void connectToWiFi(){
    WiFi.mode(WIFI_OFF);        //Prevents reconnection issue (taking too long to connect)
    delay(1000);
    WiFi.mode(WIFI_STA);
    Serial.print("Connecting to ");
    Serial.println(ssid);
    WiFi.begin(ssid, password);
    display.clearDisplay();
    display.setTextSize(1);             // Normal 1:1 pixel scale
    display.setTextColor(WHITE);        // Draw white text
    display.setCursor(0, 0);             // Start at top-left corner
    display.print(F("Connecting to \n"));
    display.setCursor(0, 50);   
    display.setTextSize(2);          
    display.print(ssid);
    display.drawBitmap( 73, 10, Wifi_start_bits, Wifi_start_width, Wifi_start_height, WHITE);
    display.display();
    
    uint32_t periodToConnect = 30000L;
    for(uint32_t StartToConnect = millis(); (millis()-StartToConnect) < periodToConnect;){
      if ( WiFi.status() != WL_CONNECTED ){
        delay(500);
        Serial.print(".");
      } else{
        break;
      }
    }
    
    if(WiFi.isConnected()){
      Serial.println("");
      Serial.println("Connected");
      
      display.clearDisplay();
      display.setTextSize(2);             // Normal 1:1 pixel scale
      display.setTextColor(WHITE);        // Draw white text
      display.setCursor(8, 0);             // Start at top-left corner
      display.print(F("Connected \n"));
      display.drawBitmap( 33, 15, Wifi_connected_bits, Wifi_connected_width, Wifi_connected_height, WHITE);
      display.display();
      
      Serial.print("IP address: ");
      Serial.println(WiFi.localIP());  //IP address assigned to your ESP
    }
    else{
      Serial.println("");
      Serial.println("Not Connected");
      WiFi.mode(WIFI_OFF);
      delay(1000);
    }
    delay(1000);
}
//=======================================================================

 

biometric fingerprint  attendance system

 

Setting server Website:

Download XAMPP server
Download Database files and website PHP pages 

Unlimited employee

Unlimited employee attendance system
Edit and Update the admin profile

Unlimited employee attendance system Admin profile
View users

Unlimited employee attendance system
attendance records reports.

Unlimited employee attendance system reports
Change the device mode (Enrollment mode: to register new users to the system, Attendance Mode: To record attendance of registered users)

Unlimited employee attendance system reports